SIB11 in LTE

SIB11: ETWS secondary notification
  •  contains an ETWS secondary notification

Signalling radio bearer: N/A
RLC-Mode: TM

Logical channel: BCCH
Direction: E‑UTRAN to UE


Important contents of SystemInformationBlockType11
messageIdentifier
serialNumber
warningMessageSegmentType
warningMessageSegmentNumber
warningMessageSegment
dataCodingScheme


Field Descriptions:
messageIdentifierIdentifies the source and type of ETWS notification (earthquake, tsunami warning, any emergency or test message)
serialNumberIdentifies variations of an ETWS notification.
-uses various mechanisms to alert the user (display message, play a tone or vibrate, location where the message is applicable, also contains an update number which specifies whether a change is in the message content or not)
warningMessageSegmentType
[last/not last]
Indicates whether the included ETWS warning message segment is the last segment of the complete segment or not
warningMessageSegmentNumber# allows oedering of the message segments
# Segment number of the ETWS warning message segment contained in the SIB. A segment number of zero corresponds to the first segment, one corresponds to the second segment, and so on
warningMessageSegmentcarries actual segment of the message 
dataCodingSchemeIdentifies the alphabet/coding and the language applied variations of an ETWS notification

SIB10 in LTE

SIB10: ETWS primary notification
  • contains an ETWS primary notification

Signalling radio bearer: N/A
RLC-Mode: TM

Logical channel: BCCH
Direction: E‑UTRAN to UE


Important contents of SystemInformationBlockType10
messageIdentifier
serialNumber
warningType
warningSecurityInfo



Field Descriptions:
messageIdentifierIdentifies the source and type of ETWS notification (earthquake, tsunami warning, any emergency or test message)
serialNumberIdentifies variations of an ETWS notification.
-uses various mechanisms to alert the user (display message, play a tone or vibrate, location where the message is applicable, also contains an update number which specifies whether a change is in the message content or not)
warningType# Identifies the warning type of the ETWS primary notification (earthquake, tsunami, etc.) and
# provides information on emergency user alert and UE popup
warningSecurityInfo# is optional, only applied when security is applied
# Provides security information for the ETWS notification

SIB9 in LTE

SIB9: Home eNB name
  • contains a home eNB name (HeNB Name)
  • HeNB provie services to Closed Subscriber Groups. The HeNB name helps the user to select the correct CSG Identity when performing a manual selection
Signalling radio bearer: N/A
RLC-Mode: TM

Logical channel: BCCH
Direction: E‑UTRAN to UE


Important contents of SystemInformationBlockType9
hnb-Name


Field Descriptions:

hnb-NameCarries the name of the home eNB

SIB7 in LTE

SIB7: Cell-reselection parameters INTER RAT Frequency (GERAN)
  • contains information relevant only for inter-RAT (GERAN) cell re-selection 
Signalling radio bearer: N/A
RLC-Mode: TM
Logical channel: BCCH
Direction: E‑UTRAN to UE


 
Important contents of SystemInformationBlockType7

t_ReselectionGERANTime to trigger for reselection. Value 0 to 7 sec. 
carrierFreqsInfoList[0]carries upto 16 instances of GERAN freq.
carrierFreqs 
startingARFCNStart of the ARFCN
bandIndicatordcs1800 or pcs1900
followingARFCNsARFCN groups
cellReselectionPriorityabsolute priority of the GERAN layer. Value 0 to 7, whereas 0 is the lowest priority
ncc_PermittedNetwork Color Code. Is a bitmap value
q_RxLevMinminimum RSSI value required
p_MaxGERANmaximum allowed UL transmit power
threshX_High# Threshold (in dB) used by UE for cell re-selection to a HIGHER priority frequency
#  The Srxlev of the candiate cell is greater then threshX_High
# Value 0 to 31 dB. Actual value= Signaled value * 2
threshX_Low# Threshold (in dB) used by UE for cell re-selection to a LOWER priority frequency
#  Cell re-selection is allowed only when Srxlev of the candiate cell is greater then threshX_Low and RSRP of serving cell is less than the value of ThreshServingLow singalled within SIB3
# Value 0 to 31 dB. Actual value= Signaled value * 2

SIB5 in LTE

SIB5: Cell-reselection parameters for INTER-Frequency

  • contains information relevant only for inter-frequency cell re-selection i.e. information about other E‑UTRA frequencies and inter-frequency neighbouring cells relevant for cell re-selection
  • includes cell re-selection parameters common for a frequency as well as cell specific re-selection parameters

Signalling radio bearer: N/A
RLC-Mode: TM

Logical channel: BCCH
Direction: E‑UTRAN to UE


Important contents of SystemInformationBlockType5


InterFreqCarrierFreqInfocan be specified upto 8 carrier frequencies
dl-CarrierFreqcarrier frequency helps the UE to search the cells
q-RxLevMinminimum RSRP value of the inter-frequency cell. Value -70 to
-22 dBm.
Actual value: signalled value * 2
p-Maxmaximum allowed UL transmit power of the cell
t-ReselectionEUTRAdefines the time to trigger for cell reselection. Value 0 to 7 sec.
t-ReselectionEUTRA-SFscaling factors for Medium and High mobility
threshX-High# Threshold (in dB) used by UE for cell re-selection to a HIGHER priority
#  The Srxlev of the candiate cell is greater then threshX_High
# Value 0 to 31 dB. Actual value= Signaled value * 2
threshX-Low# Threshold (in dB) used by UE for cell re-selection to a LOWER priority
#  Cell re-selection is allowed only when Srxlev of the candiate cell is greater then threshX_Low and RSRP of serving cell is less than the value of ThreshServingLow singalled within SIB3
# Value 0 to 31 dB. Actual value= Signaled value * 2
allowedMeasBandwidthdefined in terms of Resouce blocks associated with a specific channel bandwidth
cellReselectionPrioritydefines the Abolute priority of the frequency layer
neighCellConfiginformation regarding the neighbouring cells
q-OffsetFreqdefines the RSRP measurement offset, applied to all cells on the specified RF carrier
interFreqBlackCellListthe mentioned cells are no considered for cell reselection